更新时间:2023-04-23
这个模块提供了个的电池充电管理系统和监控外部12 v铅酸电池。与TSP系列的电源或其他稳定24 VDC或48 VDC电源*DC-UPS系统可以配置。连接电池充电和将举行由电源在充电模式。在发生电源电源故障电池将提供输出功率,直到电池放电。因此,系统的输出电压等于电池电压。为了避免过度充电电池,电池电压外部温度传感器自动调节到所需的充电电压。这可以延长电池寿命。电池是对深度放电保护。电源功率
This module provides a professional battery management system to charge and monitor an external 12V lead-acid battery. Together with a power supply of the TSP series or any other stabilized 24 VDC or 48 VDC power supply a perfect DC-UPS system can be configured. The connected battery will be charged and held in charged mode by the power supply. In the event of a mains power failure the battery will supply the output power until the battery is discharged. As a consequence, the output voltage of the system is equivalent to the battery voltage. To avoid overcharging the battery, an external temperature sensor adjusts the battery voltage automatically to the required end of charge voltage. This can extend the battery life. The battery is protected against deep discharge. Mains power and battery status are monitored regularly and failures indicated by corresponding LED’s and alarm outputs. The module also provides an external On/Off input to switch-off both, power supply and battery.
Order code | Output | Distinction |
---|---|---|
TSP-BCMU360 |
13991872250
029-88231631